Displaying 201 - 250 of 278 publications

2019

  1. S. K. Yadav, A. Khan P. Shukla Development of a high temperature facility for study of aerosol emission behavior of combustible materials, Measurement, , , pp. 308-316, 2019. Impact Factor : 2.83
  2. S. K. Yadav , Manish Joshi Yashasvi Sharma P. Shukla, Ankur Kaushik, B.K. Sapra, R. S. Singh Physico-chemical characteristics of graphite aerosols generated during postulated air ingress accident, ANNALS OF NUCLEAR ENERGY, , , pp. 100-107, 2019. DOI : https://doi.org/10.1016/j.anucene.2019.04.020
  3. S. K. Yadav, M. Kumar Y. Sharma P. Shukla, R. S. Singh, and T. Banerjee Temporal evolution of submicron particles during extreme fireworks, Environ Monit Assess., , , pp. 576, 2019. DOI : DOI: 10.1007/s10661-019-7735-2
  4. Saurabh, Sandeep Kumar D. S. Murthy CFD Analysis of Multiphase Flow Hydrodynamics In Rotating Packed Bed, ICTEA: International Conference on Thermal Engineering, , , , 2019.

2018

  1. Anuj Kumar Sharma, Arun Kumar Tiwari Amit Rai Dixit Rabesh Kumar Singh, Mahip Singh Novel uses of alumina/graphene hybrid nanoparticle additives for improved tribological properties of lubricant in turning operation, Tribology International, , , pp. 99-111, 2018. DOI : https://doi.org/10.1016/j.triboint.2017.10.036 Impact Factor : 3.44
  2. Sujit Kumar Verma, Arun Kumar Tiwari Mukesh Tripathi An evaluative observation on impact of optical properties of nanofluids in performance of photo-thermal concentrating systems., Solar Energy, , , pp. 709-724, 2018. DOI : https://doi.org/10.1016/j.solener.2018.10.084 Impact Factor : 4.807
  3. Rabesh Kumar Singh, Amit Rai Dixit Anuj Kumar Sharma Arun Kumar Tiwari, Vimal Mandal, Alokesh Pramanik Influence of graphene and multi-walled carbon nanotube additives on tribological behaviour of lubricants, International Journal of Surface Science and Engineering, , , pp. 207-227, 2018. DOI : 10.1504/IJSURFSE.2018.094773 Impact Factor : 1.849
  4. Naveen Kumar Gupta, Arun Kumar Tiwari Subrata Kumar Ghosh Experimental study of thermal performance of nanofluid-filled and nanoparticles-coated mesh wick heat pipes., Journal of Heat Transfer, , , pp. 102403-1-7, 2018. DOI : https://doi.org/10.1115/1.4040348 Impact Factor : 1.479
  5. Anuj Kumar Sharma, Arun Kumar Tiwari Amit Rai Dixit Prediction of temperature distribution over cutting tool with alumina-MWCNT hybrid nanofluid using computational fluid dynamics (CFD) analysis., International Journal of Advanced Manufacturing Technology, , , , 2018. DOI : https://doi.org/10.1007/s00170-018-1946-5 Impact Factor : 2.750
  6. Vikas Kumar, Arun Kumar Tiwari Subrata Kumar Ghosh Exergy analysis of hybrid nanofluids with optimum concentration in a plate heat exchanger., Materials Research Express, , , , 2018. DOI : https://doi.org/10.1088/2053-1591/aac799 Impact Factor : 1.449
  7. Sujit Kumar Verma, Arun Kumar Tiwari Sandeep Tiwari Durg Singh Chauhan Performance analysis of hybrid nanofluids in flat plate solar collector as an advanced working fluid., Solar Energy, , , pp. 231-241, 2018. DOI : https://doi.org/10.1016/j.solener.2018.04.017 Impact Factor : 4.807
  8. Niranjan Ghule, Prayass Rai Numerical Study of Turbine Blade film cooling Technology, National Conference on Technological Development in Civil and Mechanical Engineering TDCME-2018, , , , 2018.
  9. Shyam Verma, Devendra Singh Ajay Kumar Sharma EXPERIMENTAL INVESTIGATIONS ON A SINGLE SLOPE SOLAR STILL, International Research Journal of Engineering and Technology , , , pp. 2658-2662, 2018.
  10. Mayank Singhal, Devendra Singh Ajay Kumar Sharma SOLAR POWER WATER DISTILLATION, INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY, , , pp. 4084-4088, 2018.
  11. Anuj Kumar Sharma, Rabesh Kumar Singh Amit Rai Dixit Arun Kumar Tiwari, Mahip Singh An Investigation on Tool Flank Wear Using Alumina/MoS2 Hybrid Nanofluid in Turning Operation, Advances in Manufacturing Engineering and Materials, , , pp. 213-219, 2018. DOI : https://doi.org/10.1007/978-3-319-99353-9_23
  12. S Sharma, AK Tiwari S Tiwari R Prakash Viscosity of hybrid nanofluids: Measurement and comparison., Journal of Mechanical Engineering and Sciences, , , pp. 3614-3623, 2018. DOI : https://doi.org/10.15282/jmes.12.2.2018.8.0320
  13. Amar Deep Sheel, Arun Kumar Tiwari Shailendra Sinha Analysis of Parabolic Trough Solar Collector (PTSC) Using TiO2/Water Nanofluid., International Journal of Mechanical Engineering and Technology, , , pp. 1094–1102, 2018. Impact Factor : 11.22
  14. Deepak Kumar, Arun Kumar Tiwari CFD simulation of plate heat exchanger using hybrid nanofluid., International Journal of Mechanical Engineering and Technology, , , pp. 1411–1418, 2018. Impact Factor : 11.22
  15. Naveen Kumar Gupta, Arun Kumar Tiwari Subrata Kumar Ghosh Experimental investigation of the thermal performance of mesh wick heat pipe., Heat Transfer Research, , , pp. 1793-1811, 2018. DOI : 10.1615/HeatTransRes.2018024361 Impact Factor : 1.155
  16. Pushpendra Pandey, A. K. Mukhopadhyay Somnath Chattopadhyaya Reliability analysis and failure rate evaluation for critical subsystems of the dragline, Journal of the Brazilian Society of Mechanical Sciences and Engineering, , vol. 402, pp. 50 (1-11), 2018. DOI : https://doi.org/10.1007/s40430-018-1016-9 Impact Factor : 2.7
  17. Pushpendra Pandey, A. K. Mukhopadhyay Satya Prakash Critical Investigation into the Reliability Evaluation of a Dragline System, 3rd National Conference on Mining Equipment New Technologies Challenges & Applications, , vol. 31, pp. 121, 2018.
  18. Satya Prakash, A. K. Mukhopadhyay Pushpendra Pandey Investigation Of Rock Properties For Tricone Roller Bits In Blasthole Drilling, 3rd National Conference on Mining Equipment New Technologies Challenges & Applications, , vol. 31, pp. 168, 2018.

2017

  1. Rabesh Kumar Singh, Anuj Kumar Sharma Amit Rai Dixit Arun Kumar Tiwari, Alokesh Pramanik, Amitava Mandal Performance evaluation of alumina-graphene hybrid nano-cutting fluid in hard turning, Journal of Cleaner Production, , , pp. 830-845, 2017. DOI : https://doi.org/10.1016/j.jclepro.2017.06.104 Impact Factor : 7.051
  2. Anuj Kumar Sharma, Rabesh Kumar Singh Amit Rai Dixit Arun Kumar Tiwari Novel uses of alumina-MoS2 hybrid nanoparticle enriched cutting fluid in hard turning of AISI 304 steel, Journal of Manufacturing Processes, , , pp. 467-482, 2017. DOI : https://doi.org/10.1016/j.jmapro.2017.10.016 Impact Factor : 3.62
  3. Naveen Kumar Gupta, Arun Kumar Tiwari Subrata Kumar Ghosh Heat transfer mechanisms in heat pipes using nanofluids-A-Review, Experimental Thermal and Fluid Science, , , pp. 84-100, 2017. DOI : https://doi.org/10.1016/j.expthermflusci.2017.08.013 Impact Factor : 3.45
  4. S.K Verma, A.K Tiwari Characterization of Nanofluids as an advanced heat transporting medium for Energy Systems, Materials Today: Proceedings, , , pp. 4095–4103, 2017. DOI : https://doi.org/10.1016/j.matpr.2017.02.313 Impact Factor : 0.694
  5. Anuj Kumar Sharma, Arun Kumar Tiwari Amit Rai Dixit Rabesh Kumar Singh Investigation into Performance of SiO2 Nanoparticle Based Cutting Fluid in Machining Process, Materials Today: Proceedings, , , pp. 133–141, 2017. DOI : https://doi.org/10.1016/j.matpr.2017.01.006 Impact Factor : 0.694
  6. Rabesh Kumar Singh, Anuj Kumar Sharma Amit Rai Dixit Amitava Mandald, Arun Kumar Tiwari Experimental investigation of thermal conductivity and specific heat of nanoparticles mixed cutting fluids, Materials Today: Proceedings, , , pp. 8587–8596 , 2017. DOI : https://doi.org/10.1016/j.matpr.2017.07.206 Impact Factor : 0.694
  7. Rabesh Kumar Singh, Anuj Kumar Sharma Amit Rai Dixit Arun Kumar Tiwari, Amitava Mandal Preparation and characterization of nanoparticles mixed cutting fluids, Advanced Materials Proceedings,Scopus, , , pp. 458-462 , 2017. DOI : DOI: 10.5185/amp.2017/712
  8. Sujit Kumar Verma, Arun Kumar Tiwari Durg Singh Chauhan Experimental evaluation of flat plate solar collector using nanofluids., Energy Conversion and Management, , , pp. 103-115, 2017. DOI : https://doi.org/10.1016/j.enconman.2016.12.037 Impact Factor : 8.208
  9. Vikas Kumar, Arun Kumar Tiwari Subrata Kumar Ghosh Characterization and performance of nanofluids in plate heat exchanger., Materials Today: Proceedings -Scopus, Publisher: Elsevier, , , pp. 4070-4078, 2017. DOI : https://doi.org/10.1016/j.matpr.2017.02.310
  10. Pushpendra Pandey, Prashant Kumar Sahu Alok Ranjan Nawesh Kumar Reliability modelling and performance analysis of dragline for improving productivity and maintenance planning, 2nd International Conference on Mechanical and Manufacturing Engineering, , vol. 21, pp. 185-191, 2017.

2016

  1. Anuj Kumar Sharma, Arun Kumar Tiwari Amit Rai Dixit Rheological Behaviour of Nanofluids: A Review, Renewable & Sustainable Energy Reviews, Renewable & Sustainable Energy Reviews, , , pp. 779-791, 2016. DOI : https://doi.org/10.1016/j.rser.2015.09.033 Impact Factor : 11.24
  2. Vikas Kumar, Arun Kumar Tiwari Subrata Kumar Ghosh Effect of chevron angle on heat transfer performance in plate heat exchanger using ZnO/water nanofluid, Energy Conversion and Management, , , pp. 142-154, 2016. DOI : https://doi.org/10.1016/j.enconman.2016.03.086 Impact Factor : 6.722
  3. Anuj Kumar Sharma, Arun Kumar Tiwari Amit Rai Dixit Effects of Minimum Quantity Lubrication (MQL) in machining processes using conventional and nanofluid based cutting fluids: A review, Journal of Cleaner Production, , , pp. 1-18, 2016. DOI : https://doi.org/10.1016/j.jclepro.2016.03.146 Impact Factor : 7.051
  4. Sujit Kumar Verma, Arun Kumar Tiwari Durg Singh Chauhan Performance augmentation in flat plate solar collector using MgO/water nanofluid, Energy Conversion and Management, , , pp. 607-617, 2016. DOI : https://doi.org/10.1016/j.enconman.2016.07.007 Impact Factor : 6.722
  5. Vikas Kumar, Arun Kumar Tiwari Subrata Kumar Ghosh Effect of variable spacing on performance of plate heat exchanger using nanofluids, Energy, , , pp. 1107-1119, 2016. DOI : https://doi.org/10.1016/j.energy.2016.08.091 Impact Factor : 5.747
  6. Anuj Kumar Sharma, Rabesh Kumar Singh Amit Rai Dixit Arun Kumar Tiwari Characterization and Experimental investigation of Al2O3 nanoparticle based cutting fluid in turning of AISI 1040 steel under minimum quantity lubrication (MQL)., Materials Today: Proceedings, , , pp. 1899–1906 , 2016. DOI : https://doi.org/10.1016/j.matpr.2016.04.090 Impact Factor : 0.694
  7. Anuj Kumar Sharma, Arun Kumar Tiwari Rabesh Kumar Singh Amit Rai Dixit Tribological Investigation of TiO2 Nanoparticle based Cutting Fluid in Machining under Minimum Quantity Lubrication (MQL), Materials Today: Proceedings, , , pp. 2155–2162 , 2016. DOI : https://doi.org/10.1016/j.matpr.2016.04.121 Impact Factor : 0.694
  8. D. Das, Vipul Pathak A. S. Yadav Rohit Upadhyaya Evaluation of performance, emission and combustion characteristics of diesel engine fueled with castor biodiesel, Biofuels, Taylor & Francis, , , , 2016. DOI : DOI: 10.1080/17597269.2016.1221298
  9. Akash Srivastava, Sumeet Shekhar Prayass Rai Analysis of Welding Joints and Processes, International Journal of Computer Applications, , , pp. 0975 – 8887, 2016. Impact Factor : 3.12
  10. Anuj Kumar Sharma, Arun Kumar Tiwari Amit Rai Dixit Characterization of TiO2, Al2O3 and SiO2 nanoparticle based cutting fluids., Materials Today: Proceedings, , , pp. 1890-1898, 2016. DOI : https://doi.org/10.1016/j.matpr.2016.04.089
  11. Pushpendra Pandey, Saurabh Dwivedi Study of projection of annual output, ownership cost, operating cost and cost per tonne of coal exposed by dragline, Journal of Mines, Metals and Fuels, , vol. 6411, pp. 568-571, 2016.

2015

  1. Sujit Kumar Verma, Arun Kumar Tiwari Progress of Nanofluid Application in Solar Collectors: A Review, Energy Conversion and Management, , , pp. 324-346, 2015. DOI : https://doi.org/10.1016/j.enconman.2015.04.071 Impact Factor : 6.722
  2. Arun Kumar Tiwari, Pradyumna Ghosh Jahar Sarkar Particle concentration levels of various nanofluids in plate heat exchanger for best performance, International Journal of Heat and Mass Transfer, , , pp. 1110-1118, 2015. DOI : https://doi.org/10.1016/j.ijheatmasstransfer.2015.05.118 Impact Factor : 4.149
  3. Anuj Kumar Sharma, Arun Kumar Tiwari Amit Rai Dixit Progress of nanofluids application in machining: A review, Materials and Manufacturing Processes, Materials and Manufacturing Processes, , , pp. 813-828, 2015. DOI : https://doi.org/10.1080/10426914.2014.973583 Impact Factor : 3.35
  4. Vikas Kumar, Arun Kumar Tiwari Subrata Kumar Ghosh Application of nanofluids in plate heat exchanger: a review, Energy Conversion and Management, , , pp. 1017-1036, 2015. DOI : https://doi.org/10.1016/j.enconman.2015.08.053 Impact Factor : 6.722
  5. Rajesh Bajaj, Arun Kumar Tiwari Amit Rai Dixit Current trends in electric discharge machining using micro and nano powder materials- A Review., Materials Today: Proceedings, , , pp. 3302–3307 , 2015. DOI : https://doi.org/10.1016/j.matpr.2015.07.147 Impact Factor : 0.694
  6. Anuj Kumar Sharma, Arun Kumar Tiwari Amit Rai Dixit Improved Machining Performance with Nanoparticle Enriched Cutting Fluids under Minimum Quantity Lubrication (MQL) Technique- A Review, Materials Today: Proceedings, , , pp. 3545-3551, 2015. DOI : https://doi.org/10.1016/j.matpr.2015.07.066 Impact Factor : 0.694
  7. Anuj Kumar Sharma, Arun Kumar Tiwari Amit Rai Dixit Mechanism of Nanoparticles functioning and Effects in Machining Processes: A Review., Materials Today: Proceedings, , , pp. 3539-3544, 2015. DOI : https://doi.org/10.1016/j.matpr.2015.07.331 Impact Factor : 0.694