Displaying 101 - 150 of 250 publications

2021

  1. Naveen Kumar, Deepak Singh, Abhishek Nigam, Omprakash Rajpoot, Mayank Kumar, Yadav, Yogendra Pratap Singh, P. Shakti Prakash, Samarjit Singh Structural and magnetic properties of zinc doped copper ferrite synthesized by sol-gel and hydrothermal route, MATERIALS PHYSICS AND MECHANICS, , , pp. 306-314, 2021. DOI : 10.18149/MPM.4722021_12 Impact Factor : 0.73
  2. Vivek Bahadur, Devendra Singh Ajay Kumar Sharma Akhand Pratap Singh Experimental investigations on a single basin double slope solar still, journal of xidian, , , , 2021.
  3. Amit Kumar , Arun Kumar Tiwari Zafar Said A comprehensive review analysis on advances of evacuated tube solar collector using nanofluids and PCM, Sustainable Energy Technologies and Assessments , , , pp. 101417, 2021. DOI : https://doi.org/10.1016/j.seta.2021.101417 Impact Factor : 5.353
  4. Sunil Kumar, Devendra Singh Ajay Kumar Sharma Experimental performance of bael biodiesel as a fuel in a CI engine, journal of xidian , , , , 2021.
  5. Sakshi Tyagi, Pawan Kumar Singh Arun Kumar Tiwari Pritam Pain Optimization and Comparison of Photovoltaic Parameters of Zinc Oxide (ZnO)/Graphene Oxide (GO) and Zinc Oxide (ZnO)/Carbon Quantum Dots (CQDs) Hybrid solar cell using Firefly Algorithm for application in Solar Trigeneration System in Commercial Buildings, Sustainable Energy Technologies and Assessments, , , pp. 101357, 2021. DOI : https://doi.org/10.1016/j.seta.2021.101357 Impact Factor : 5.353
  6. Anurag Namdev, Amit Telang Rajesh Purohit Effect of Graphene Nano Platelets on Mechanical and Physical Properties of Carbon Fibre/Epoxy Hybrid Composites, Advances in Materials and Processing Technologies , , vol. 8, , 2021. DOI : https://doi.org/10.1080/2374068X.2021.1939557
  7. Zafar Said, Mokhtar Ghodbane Arun Kumar Tiwari Hafiz Muhammad Ali, Boussad Boumeddane, Ziad M Ali, 4E (Energy, Exergy, Economic, and Environment) examination of a small LFR solar water heater: An experimental and numerical study, Case Studies in Thermal Engineering, , , pp. Elsevier, 2021. DOI : https://doi.org/10.1016/j.csite.2021.101277
  8. Aarasi Singh, Vinod Kumar Yadav et al Estimation of performance parameter of Top-Lit up draft cookstove using locally available wood feedstock, International Journal of Energy for a Clean Environment, , vol. 226, pp. 129-146, 2021.
  9. Zafar Said, L Syam Sundar Arun Kumar Tiwari Hafiz Muhammad Ali, Mohsen Sheikholeslami, Evangelos Bellos, Hamza Babar, Recent advances on the fundamental physical phenomena behind stability, dynamic motion, thermophysical properties, heat transport, applications, and challenges of nanofluids, Physics Reports, , , , 2021. DOI : https://doi.org/10.1016/j.physrep.2021.07.002 Impact Factor : 25.8
  10. Anurag Namdev, Amit Telang Rajesh Purohit Ashish Kumar The effect of inter critical heat treatment on mechanical and wear properties of AISI 1015 steel, Advances in Materials and Processing Technologies , , vol. 8, pp. 434-444, 2021. DOI : https://doi.org/10.1080/2374068X.2021.1945307
  11. shailendra kumar verma, vineet dubey shailendra sinha A review on additive mixed electrical discharge machining processes, Materials Today: Proceedings -Scopus, Publisher: Elsevier, , , pp. 709-715, 2021. DOI : doi.org/10.1016/j.matpr.2020.10.615
  12. Krishan Kumar Patel, Rajesh Purohit Sar Hashmi Anurag Namdev, Rakesh Singh Influence of moisture on microwave-induced shape memory thermoplastic polyurethane/graphene nanoplatelets composite, "SADHANA - Academy Proceedings In Engineering Sciences, , vol. 46, pp. 1-11, 2021. DOI : https://doi.org/10.1007/s12046-021-01759-1 Impact Factor : 1.214
  13. Devendra Singh, Ajay Kumar Sharma Thermal analysis of modified multi-wick basin type inverted absorber solar still, Journal of Mechanical Science and Technology , , , , 2021. DOI : https://doi.org/10.1007/s12206-021-0443-1
  14. Aparna Singh, Shailendra Sinha Akhilesh Kumar Choudhary Optimization of Operating Parameters of Diesel Engine Powered with Jatropha Oil Diesel Blend by Employing Response Surface Methodology, International Journal of Renewable Energy Research, , , pp. 504-513, 2021. Impact Factor : 5.127
  15. Rajeev Singh, Avadesh K Sharma Ajay Kumar Sharma Physical and mechanical behavior of NiTi composite fabricated by newly developed uni-axial compaction die, Materials Research, , , , 2021. DOI : http://dx.doi.org/10.1590/1980-5373-mr-2020-0549 Impact Factor : 1.511
  16. Arun Kumar Tiwari, Summaiya Javed Hakan F Oztop Zafar Said, Naimish S Pandya Experimental and numerical investigation on the thermal performance of triple tube heat exchanger equipped with different inserts with WO3/water nanofluid under turbulent condition., International Journal of Thermal Sciences -SCI, Publisher:Elsevier, Impact factor: 3.615 , , , pp. 106861, 2021. DOI : https://doi.org/10.1016/j.ijthermalsci.2021.106861 Impact Factor : 3.476
  17. Rajeev Singh, Avadesh K Sharma Ajay Kumar Sharma Design and development of modified cold compaction die for fabrication of nickel-titanium composite, IOP Conference Series: Materials Science and Engineering, , , , 2021.
  18. Arun Kumar Tiwari, Naimish S Pandya Zafar Said Hakan F Öztop, Nidal Abu-Hamdeh 4S consideration (synthesis, sonication, surfactant, stability) for the thermal conductivity of CeO2 with MWCNT and water based hybrid nanofluid: An experimental assessment., Colloids and Surfaces A: Physicochemical and Engineering Aspects, , , pp. 125918, 2021. DOI : https://doi.org/10.1016/j.colsurfa.2020.125918 Impact Factor : 3.99
  19. Arun Kumar Tiwari, Naimish S Pandya Zafar Said Saumya H Chhatbar, Yusuf A Al-Turki, Avinash R Patel 3S (Sonication, surfactant, stability) impact on the viscosity of hybrid nanofluid with different base fluids: An experimental study., Journal of Molecular Liquids, , , pp. 115455, 2021. DOI : https://doi.org/10.1016/j.molliq.2021.115455 Impact Factor : 5.065
  20. Avadesh K Sharma, Rajeev Singh Arun Kumar Tiwari Ajay K Sharma Enhancement of Physical and Mechanical characteristics of Ni Ti Composite containing Ag and TiC, Journal of Materials Engineering and Performance, , vol. 31, pp. 2934–2945 , 2021. DOI : DOI : https://doi.org/10.1007/s11665-021-06451-3 Impact Factor : 2.036
  21. Rajesh Bajaj, Amit Rai Dixit Arun Kumar Tiwari Nitin Kumar Chauhan Machining performance enhancement of EN-31 diesteel using MWCNT mixed rotary EDM., Indian Journal of Engineering and Materials Sciences, , , pp. 309-319, 2021. Impact Factor : 0.521
  22. Zafar Said, Mokhtar Ghodbane L Syam Sundar Arun Kumar Tiwari, Mohsen Sheikholeslami, Boussad Boumeddane Heat transfer, entropy generation, economic and environmental analyses of linear fresnel reflector using novel rGO-Co3O4 hybrid nanofluids., renewable Energy, , , pp. 420-437, 2021. DOI : https://doi.org/10.1016/j.renene.2020.11.054 Impact Factor : 6.274
  23. R. Singh, A. K. Sharma A. K. Sharma Nickel-titanium based nanocomposites for orthopedic applications: The effects of Reinforcements, Digest Journal of Nanomaterials and Biostructures, , vol. Vol. 164, pp. 1501-1518, 2021. Impact Factor : 0.899

2020

  1. Sumit Kumar Pandey, Pramod Kumar Vishwakarama Sunil Kumar Yadav Prashant Shukla, Anchal Srivastava Multiwalled Carbon Nanotube Filters for Toxin Removal from Cigarette Smoke, ACS Appl. Nano Mater., , , pp. 760-771, 2020. DOI : https://doi.org/10.1021/acsanm.9b02277
  2. Arun Prakash, Devendra Singh Ajay Kumar Sharma Static Structural Simulation Analysis of Leaf Spring using Ansys Workbench, International Journal of Innovative Technology and Exploring Engineering, , , pp. 201-206, 2020. DOI : DOI: 10.35940/ijitee.H6281.069820
  3. Avadesh K Sharma, Rajeev Singh Arun K Tiwari Ajay K Sharma Design, fabrication and analysis of compaction die for powder processing., IOP Conference Series: Materials Science and Engineering, , , pp. 012005, 2020.
  4. S. K. Yadav, P. Shukla Manish Joshi , A. Khan, B.K. Sapra, A.K. Jha, R.S.Singh Emission characteristics of ultrafine particles from bare and Al2O3 coated graphite for high temperature applications, scientific Report, , , pp. 14595, 2020. DOI : https://doi.org/10.1038/s41598-020-71424-w
  5. Ram Kishan, Devendra Singh Ajay Kumar Sharma CFD ANALYSIS OF HEAT EXCHANGER MODELS DESIGN USING ANSYS FLUENT, International Journal of Mechanical Engineering and Technology, , , , 2020.
  6. Arun Kumar Tiwari, Naimish S Pandya Harshang Shah Zafar Said Experimental comparison of specific heat capacity of three different metal oxides with MWCNT/water-based hybrid nanofluids: proposing a new correlation., Applied Nanoscience, , , pp. 1-11, 2020. Impact Factor : 3.807
  7. Rajat Kumar, Devendra Singh Ajay Kumar Sharma STATIC THERMAL ANALYSIS OF FINS MODELS USING ANSYS, International Journal of Mechanical Engineering and Technology, , , , 2020.
  8. Mohammed Zaki Hayat, Gopal Nandan Arun Kumar Tiwari Sanjeev Kumar Sharma, Ramakant Shrivastava, Ashok Kumar Singh Numerical study on heat transfer enhancement using twisted tape with trapezoidal ribs in an internal flow., Materials Today: Proceedings, , , , 2020. DOI : https://doi.org/10.1016/j.matpr.2020.09.061
  9. Mohammed Reza Hajizadeh, Elham Abohamzeh Arun Kumar Tiwari Discharging of PCM for ventilation system incorporating nanoparticles, Journal of Molecular Liquids, , , pp. 113696, 2020. DOI : https://doi.org/10.1016/j.molliq.2020.113696 Impact Factor : 4.561
  10. Rajesh Bajaj, Amit Rai Dixit Arun Kumar Tiwari Machining performance enhancement of powder mixed electric discharge machining using Green dielectric fluid., Journal of the Brazilian Society of Mechanical Sciences and Engineering, , , pp. 1-20, 2020. Impact Factor : 1.698
  11. Rahul, Devendra Singh Ajay Kumar Sharma Strength Analysis of Welded Joint Between Lap Joint And ‘L’ Type Joint at Various Bead Thickness Using Ansys, Journal of Xidian University, , vol. VOLUME 14ISSUE 7, pp. 2075-2086, 2020. DOI : https://doi.org/10.37896/jxu14.7/241
  12. Aparna Singh, Shailendra Sinha Akhilesh KumarChoudhary Hitesh Panchal Optimization of performance and emission characteristics of CI engine fueled with Jatropha biodiesel produced using a heterogeneous catalyst (CaO), Fuel, , , , 2020. DOI : doi.org/10.1016/j.fuel.2020.118611
  13. Mohammed Reza Hajizadeh, Elham Abohamzeh M Jafaryar Arun Kumar Tiwari Influence of nanoparticles and porous plates on discharging of ventilation unit., Powder Technology, , , pp. 513-520, 2020. DOI : https://doi.org/10.1016/j.powtec.2020.07.106 Impact Factor : 4.142
  14. Saurabh Dayal, Devendra Singh Ajay Kumar Sharma Experimental and Theoretical Performance Analysis of Emission and Combustion Characteristics of Diesel Engine using Bio Diesel as an Alternate Fuel, International Journal of Innovative Technology and Exploring Engineering, , , , 2020.
  15. Anurag Namdev, Amit Telang Rajesh Purohit Study on eco-friendly polyurethane polymer composites, Journal of Green Engineering, , vol. 109, pp. 4626–4638, 2020. DOI : https://www.scopus.com/authid/detail.uri?authorId=57218384690
  16. Ajai Prasad Nigam , Shailendra Sinha Techniques to control IC engine exhaust emissions through modification in fuel and intake air – a review, Journal of Ambient Energy, , , , 2020. DOI : https://doi.org/10.1080/01430750.2020.1831591
  17. Nese Keklikcioglu Cakmak, Zafar Said L Syam Sundar Ziad M Ali, Arun Kumar Tiwari Preparation, characterization, stability, and thermal conductivity of rGO-Fe3O4-TiO2 hybrid nanofluid: An experimental study., Powder Technology, , , pp. 235-245, 2020. DOI : https://doi.org/10.1016/j.powtec.2020.06.012 Impact Factor : 4.142
  18. Sundar Lal, Devendra Singh Ajay Kumar Sharma Exploratory Study of the HCCI Engine Employing Exhaust Gas Recirculation, International Journal of Innovative Technology and Exploring Engineering, , , , 2020.
  19. Ravi Kumar, Ajay Kumar Sharma Devendra Singh Endurance Study Of A Single Cylinder Diesel Engine Using Jatropha Biodiesel, INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY, , , pp. 2544-2550, 2020. DOI : 04/04/2020
  20. Naimish S. Pandya, Harshang Shah Maysam Molana Arun Kumar Tiwari Heat transfer enhancement with nanofluids in plate heat exchangers: A comprehensive review, European Journal of Mechanics - B/Fluids, , , pp. 173-190, 2020. DOI : https://doi.org/10.1016/j.euromechflu.2020.02.004 Impact Factor : 1.993
  21. Aparna Singh, Shailendra Sinha Akhilesh KumarChoudhary H. Chelladurai Biodiesel production using heterogeneous catalyst, application of Taguchi robust design and response surface methodology to optimise diesel engine performance fuelled with Jatropha biodiesel blends, Journal of Ambient Energy, , , , 2020. DOI : https://doi.org/10.1080/01430750.2020.1789741
  22. Shubham Sharma, Ravi Prakash Sandeep Tiwari Arun Kumar Tiwari Study of a Water-Based Hybrid Solar Photovoltaic Thermal Collector., Proceedings of International Conference in Mechanical and Energy Technology, , , pp. 519-527, 2020.
  23. Maneesh Kumar, Devendra Singh Ajay Kumar Sharma Performance Analysis of Solar Stills with Different Absorbing Materials, International Journal of Innovative Technology and Exploring Engineering, , , , 2020.
  24. AK Sethi, VK Dwivedi Sudhanshu Sharma AK Sharma Thermal Modeling and Analysis of Double-Slope Solar Still, Springer, Singapore, , , pp. 665-674, 2020.
  25. Gaurav Bharadwaj, Kamal Sharma Performance analysis of hybrid PCM by doping Graphene, Materials Today: Proceedings, , , , 2020. DOI : https://doi.org/10.1016/j.matpr.2020.01.052 Impact Factor : 0.694
  26. Kuwar Mausam, Sumit Kumar Subrata Kumar Ghosh Arun Kumar Tiwari, Mudit Sehgal Solicitation of nanoparticles/fluids in solar thermal energy harvesting: A review., Materials Today: Proceedings, , , pp. 2289-2295, 2020. DOI : https://doi.org/10.1016/j.matpr.2020.02.495
  27. Anuj Kumar Sharma, Rabesh Kumar Singh Arun Kumar Tiwari Amit Rai Dixit, Jitendra Kumar Katiyar Rheological Behaviour of Hybrid Nanofluids: A Review, Tribology in Materials and Applications, , , pp. 77-94, 2020. DOI : https://doi.org/10.1007/978-3-030-47451-5_4