Er. Amit Kumar

Assistant Professor

Additional Responsibilities

Assistant Center Superintendent in Examination Cell Faculty Adviser of B. Tech. (First Year)

Educational Qualifications

M. Tech. in Control & Instrumentation in 2013 from MNNIT, Allahabad.

Research Interests

Digital Circuits, Control Systems and Microcontrollers & Embedded Systems.

A National Conference on Recent Trends in Energy Systems (NCRTES-13), KNIT, Sultanpur, 2013.

1st National Power & Energy System Conference (NPESC-2014), KNIT, Sultanpur, 2014.

2nd National Power & Energy System Conference (NPESC-2015), KNIT, Sultanpur, 2015.

[ 1 ] Ashish Kumar Saxena, Amit Kumar, “Review of Different Types of Over- Current Protection Circuits used in Various Applications,” International Journal of Science and Research (IJSR) Vol. 4, pp. 1164 – 1149, May 2015.

[ 2 ] Mukesh Kumar Kushwaha, Amit Kumar, “Delay Optimization of Low Power Reversible Gate using MOS Transistor Level Design”. International Journal of Engineering and Research and Application, vol.5, pp. 1-6, 2015.

[ 3 ] Mukesh Kumar Kushwaha, Amit Kumar, “Designing Fault Tolerant Reversible Nano Circuits Using New Reversible Gate of Protection,” International Conference on Emerging Trends in Electrical, Electronics and Sustainable Energy Systems (ICETEESE-16), Vol. 2, pp. 251- 254, March 2016.

[ 4 ] Ashish Kumar Saxena, Amit Kumar, “ Design of Over – Current Protection for Digital Power Amplifier,” International Conference on Emerging Trends in Electrical, Electronics and Sustainable Energy Systems (ICETEESE-16), Vol. 2, pp. 126- 128, March 2016.

[ 5 ] Agrawal, Gaurav, and Amit Kumar, “Performance Evaluation of CNTFET based Ternary Basic Gates and Half Adder”. International Journal of Science and Research (IJSR) Vol. 5, Issue 5, May 2016, 787-791.

[ 6 ] Agrawal, Gaurav, and Amit Kumar, “Design and Performance Analysis of TFA Cell Using CNTFET”. International Journal of Science and Research (IJSR) Vol. 5, Issue 7, July 2016, 1694-1697.

[ 7 ] Sumit Kumar Srivastava, Amit Kumar, “Minimization of Leakage Current of 6T SRAM using Optimal Technology”, International Journal of Science and Research (IJSR) Vol. 6, Issue 6, June 2017.

[ 8 ] Sumit Kumar Srivastava, Amit Kumar, “ Characterization of 6T CMOS SRAM in 65nm and 120nm Technology using low power techniques”, International Research Journal of Engineering and Technology (IRJET), Vol. 4, Issue 7, July 2017.

[ 9 ] Chandra Kishor and Amit Kumar, “Latch-Type Sense Amplifier Modification for Coupling Suppression,” International Journal of Engineering Trends and Technology (IJETT) – Vol. 64, no. 1, pp. 36-39, October 2018

M.TECH. in Control and Instrumentation from MNNIT ALLAHABAD, Prayagraj, U.P. in 2013. B.TECH. in Electronics Engineering from Institute of Engineering and Technology, Lucknow, U.P. in 2000. M.TECH. (Thesis) 12 (Guided). B.TECH. (Project) 25 (Guided). Additional Charge of Assistant Central Superintendent in Examination Cell.

Displaying 1 - 1 of 1

Book Chapter

2016

ELECTRO-MECHANICAL ENERGY CONVERSION-I, Er. Pramod Kumar Rajdan , Er. Amit Kumar , 125 pages, SHREE PUBLISHERS & DISTRIBUTORS , 2016, ISBN : 978-81-8329-802-5,

Displaying 1 - 11 of 11 publications

2023

Priyanka Pandey, Amit Kumar, Rajiv Kumar Singh, Implementation of Low-Power Frequency Divider Circuit using GDI Technique, International Conference on Computation System and Information Technology for Sustainable Solutions , IEEE, , , 2023. DOI : 10.1109/CSITSS57437.2022.10026389

2022

Ram Singh , Amit Kumar, Design and analysis of a low power high speed full adder using 2×1 multiplexer, 2022 IEEE North Karnataka Subsection Flagship International Conference, Vijaypur, India, 2022, IEEE , , , 2022. DOI : 10.1109/NKCon56289.2022.10127080
Ram Singh , Amit Kumar, A Comparative Study on Different Types of Hybrid Full Adder Analysis, International Journal of Emerging Technologies and Innovative Research(JETIR), IJ publication, vol. 9, 9, pp. e736-e741, 2022. Impact Factor : 7.95
Km. Jyotsana, Amit Kumar, Design and Implementation of Low Power Flipped Voltage Follower Differential Pair-based Summing Stage OTA, 2022 IEEE 3rd Global Conference for Advancement in Technology , IEEE, , , 2022. DOI : 10.1109/GCAT55367.2022.9971883
Priyanka Pandey, Amit Kumar, Rajiv Kumar Singh, AREA EFFICIENT DUAL EDGE TRIGGERED FLIP FLOP, ICTACT JOURNAL ON MICROELECTRONICS, OCTOBER 2022, VOLUME: 08, ISSUE: 03, An International Publication of ICT Academy, vol. 8, 3, pp. 1408 - 1413 , 2022. DOI : 10.21917/ijme.2022.0242

2021

Priyanka Tiwari, Amit Kumar, 2:1 MUX Design Using Multidinous Logic Families at 45nm Technology, 2022 IEEE 3rd Global Conference for Advancement in Technology , IEEE, , , 2021. DOI : 10.1109/GCAT52182.2021.9587845

2019

Richa Pathak , Amit Kumar, International Journal for Research in Applied Science & Engineering Technology (IJRASET), journal, International Journal of Scientific and Research Publications, , pp. pp 231-237, 2019. DOI : 10.22214 Impact Factor : 7.177
Sachin Verma, Amit Kumar, Analysis of Reduction of PAPR by Linear Predictive Coding in OFDM, International Journal for Research in Applied Sciences and Biotechnology, VANDANA PUBLISHER, vol. 6, 5, pp. 1-6, 2019. DOI : 10.31033/ijrasb.6.5.1 Impact Factor : 2.8
Sachin Verma, Amit Kumar, Ashish Kumar Rao, Peak to Average Power Ratio Reduction Technique using LPC Coding in OFDM System, INTERNATIONAL RESEARCH JOURNAL OF ENGINEERING AND TECHNOLOGY, , vol. 6, 9, pp. 105-109, 2019. Impact Factor : 7.34
CHANDRA KISHORE, Amit Kumar, Comparative Analysis of Various Sense Amplifiers in 45nmCMOS Technology, International Research Journal of Engineering and Technology , , vol. 6, 5, pp. 102-106, 2019. Impact Factor : 7.211

2018

CHANDRA KISHORE, Amit Kumar, LatchType Sense Amplifier Modification for Coupling Suppression, International Journal of Engineering Trends and Technology, Seventh Sense Research Group®, vol. 64, 1, pp. 36-40, 2018. DOI : 10.14445/22315381/IJETT-V64P206

Displaying 1 - 1 of 1 publications

Chandra Kishor , Amit Kumar Comparative Analysis of Various Sense Amplifiers in 45 nm CMOS Technology, journal, , , pp. pp. 102-106, 2019. Impact Factor : 7.211

Master of Technology

DESIGN AND SIMULATION OF LOW VOLTAGE AND LOW POWER OPERATIONAL
TRANSCONDUCTANCE AMPLIFIER (OTA), Km. JYOTSANA, 2022, Dr APJ Abdul Kalam Technical University Uttar Pradesh, Lucknow
[email protected], RAM SINGH, 2022, Dr APJ Abdul Kalam Technical University Uttar Pradesh, Lucknow
IMPLEMENTATION OF LOW-POWER HIGH-SPEED FREQUENCY DIVIDER USING
EDGE-TRIGGERED FLIP FLOP, PRIYANKA PANDEY, 2022, Dr APJ Abdul Kalam Technical University Uttar Pradesh, Lucknow
4-bit Barrel Shifter Design using Carbon
Nanotube Field Effect Transistor, PRIYANKA TIWARI, 2021, Dr APJ Abdul Kalam Technical University Uttar Pradesh, Lucknow
PERFORMANCE ANALYSIS OF VARIOUS SENSE AMPLIFIERS IN 45nm CMOS TECHNOLOGY, CHANDRA KISHORE, 2019, Dr APJ Abdul Kalam Technical University Uttar Pradesh, Lucknow
ANALYSIS OF REDUCTION OF PAPR BY LINEAR PREDICTIVE CODING IN OFDM, SACHIN VERMA, 2019, Dr APJ Abdul Kalam Technical University Uttar Pradesh, Lucknow
DESIGN AND ANALYSIS OF ACCURACY-
CONFIGURABLE ADDER, RICHA PATHAK, 2019, Dr APJ Abdul Kalam Technical University Uttar Pradesh, Lucknow

Er. Amit Kumar

Additional Responsibilities

Educational Qualifications

Research Interests

2016

2023

2022

2021

2019

2018

Master of Technology

Master of Technology

Council/Bodies

Co-curriculars

IET in News

Contact Us